CVSS base score: not scored
Vendor: Linux Product: Linux
In the Linux kernel, the following vulnerability has been resolved: bnx2x: Fix multiple UBSAN array-index-out-of-bounds Fix UBSAN warnings that occur when using a system with 32 physical cpu cores or more, or when the user defines a number of Ethernet queues greater than or equal to FP_SB_MAX_E1x using the num_queues module parameter. Currently there is a read/write out of bounds that occurs on the array "struct stats_query_entry query" present inside the "bnx2x_fw_stats_req" struct in "drivers/net/ethernet/broadcom/bnx2x/bnx2x.h". Looking at the definition of the "struct stats_query_entry query" array: struct stats_query_entry query[FP_SB_MAX_E1x+ BNX2X_FIRST_QUEUE_QUERY_IDX]; FP_SB_MAX_E1x is defined as the maximum number of fast path interrupts and has a value of 16, while BNX2X_FIRST_QUEUE_QUERY_IDX has a value of 3 meaning the array has a total size of 19. Since accesses to "struct stats_query_entry query" are offset-ted by BNX2X_FIRST_QUEUE_QUERY_IDX, that means that the total number of Ethernet queues should not exceed FP_SB_MAX_E1x (16). However one of these queues is reserved for FCOE and thus the number of Ethernet queues should be set to [FP_SB_MAX_E1x -1] (15) if FCOE is enabled or [FP_SB_MAX_E1x] (16) if it is not. This is also described in a comment in the source code in drivers/net/ethernet/broadcom/bnx2x/bnx2x.h just above the Macro definition of FP_SB_MAX_E1x. Below is the part of this explanation that it important for this patch /* * The total number of L2 queues, MSIX vectors and HW contexts (CIDs) is * control by the number of fast-path status blocks supported by the * device (HW/FW). Each fast-path status block (FP-SB) aka non-default * status block represents an independent interrupts context that can * serve a regular L2 networking queue. However special L2 queues such * as the FCoE queue do not require a FP-SB and other components like * the CNIC may consume FP-SB reducing the number of possible L2 queues * * If the maximum number of FP-SB available is X then: * a. If CNIC is supported it consumes 1 FP-SB thus the max number of * regular L2 queues is Y=X-1 * b. In MF mode the actual number of L2 queues is Y= (X-1/MF_factor) * c. If the FCoE L2 queue is supported the actual number of L2 queues * is Y+1 * d. The number of irqs (MSIX vectors) is either Y+1 (one extra for * slow-path interrupts) or Y+2 if CNIC is supported (one additional * FP interrupt context for the CNIC). * e. The number of HW context (CID count) is always X or X+1 if FCoE * L2 queue is supported. The cid for the FCoE L2 queue is always X. */ However this driver also supports NICs that use the E2 controller which can handle more queues due to having more FP-SB represented by FP_SB_MAX_E2. Looking at the commits when the E2 support was added, it was originally using the E1x parameters: commit f2e0899f0f27 ("bnx2x: Add 57712 support"). Back then FP_SB_MAX_E2 was set to 16 the same as E1x. However the driver was later updated to take full advantage of the E2 instead of having it be limited to the capabilities of the E1x. But as far as we can tell, the array "stats_query_entry query" was still limited to using the FP-SB available to the E1x cards as part of an oversignt when the driver was updated to take full advantage of the E2, and now with the driver being aware of the greater queue size supported by E2 NICs, it causes the UBSAN warnings seen in the stack traces below. This patch increases the size of the "stats_query_entry query" array by replacing FP_SB_MAX_E1x with FP_SB_MAX_E2 to be large enough to handle both types of NICs. Stack traces: UBSAN: array-index-out-of-bounds in drivers/net/ethernet/broadcom/bnx2x/bnx2x_stats.c:1529:11 index 20 is out of range for type 'stats_query_entry [19]' CPU: 12 PID: 858 Comm: systemd-network Not tainted 6.9.0-060900rc7-generic #202405052133 Hardware name: HP ProLiant DL360 Gen9/ProLiant DL360 ---truncated---
No mentions found in monitored research blogs or news feeds.
| Date | Advisory | Issuer |
|---|---|---|
| 2025-08-14 | ICSA-25-226-15: Siemens SINEC OS | CISA |
| 2025-08-14 | ICSA-25-226-07: Siemens Third-Party Components in SINEC OS | CISA |
Each milestone comes from a different source, so gaps between them are gaps in what those sources publish, not evidence that nothing happened. EPSS history for this CVE holds 3 points from 2026-11-05, tracked daily from 2026-11-05; earlier points are weekly, which dates a spike to within a week. Peak probability 0.3% on 2026-11-05.
Check whether a specific version is affected →
What each source publishes about which product versions carry this vulnerability, kept as written rather than merged. Absence here means no source has published applicability data, not that nothing is affected.
Blind spot. No public detection — verify by version/patch. Nothing in the monitored scanner, IDS, SIEM or offensive-tool collections references this CVE, so exposure has to be established from asset inventory and patch level rather than from a signature.
Coverage across public collections only: Nuclei and OpenVAS NVT (scan);
Snort and Suricata ET Open (network); Sigma and YARA (host/SIEM);
Metasploit, Exploit-DB, public GitHub repositories and NVD exploit references (exploit). Absence
here means nothing public was found, not that detection is impossible.
GitHub PoC repositories are collected automatically by
PoC-in-GitHub (CC0) and filtered to repositories that are
still online, contain code, and are starred or at least two weeks old. They are
still not vetted: some are fakes and some are malware. Treat
them as evidence that code was published, not as code to run.
NVD exploit references are links NVD's analysts tag as exploits; they confirm
an exploit was referenced but carry no date. This product uses data from the
NVD but is not endorsed or certified by the NVD.
OpenVAS coverage derives from the Greenbone Community Feed, made available
under the Open Database License (ODbL) v1.0;
its individual Vulnerability Tests are licensed
GNU GPL v2.
No exploit-tool sightings recorded for this CVE.
Metasploit is dated by the first commit of the module file, Exploit-DB by its publication date, and GitHub repositories by their creation date. GitHub PoC repositories are filtered (still online, contain code, starred or at least two weeks old) but not vetted: some are fakes and some are malware, so they show that code was published, not that it works or is safe to run. Evidence tiers are explained on the About page.
Where the distribution has shipped a fix, and in which version. Green means the release has resolved it, amber that it is still open. Data from the Debian Security Tracker, used under Debian's MIT / GPLv2+ terms. Debian is upstream of several other distributions, so a fix here often precedes theirs.
| If the asset is | Remediate within | Table 1 row |
|---|---|---|
| Publicly exposed | 60 days | 8 of 16 |
| Not publicly exposed | Fix on system upgrade | 16 of 16 |
BOD 26-04 replaced the single KEV deadline of BOD 22-01 with four inputs: whether the asset is publicly exposed, KEV status, whether exploitation is automatable, and technical impact. Exposure belongs to each agency's asset, not to the CVE, so both outcomes are shown. Automatable and technical impact come from the CISA assessment above. Days are calendar days; for KEV entries the clock starts on the date it was added, and otherwise when the agency identifies the vulnerability on an asset. Agencies make the final exposure call asset by asset, and may set shorter timelines.
CVE.org record → NVD entry → FortiGuard Labs → Rapid7 AttackerKB →